Using an Iridium Extreme PTT (Push-To-Talk) Satellite Phone is quite straightforward, even though it has some advanced features. Here's a simple guide on how to use it:
Charge the Phone: First, make sure your phone is fully charged. Connect it to the charger and wait until the battery indicator shows it's fully charged.
Power On: To turn on the phone, press and hold the red power button, usually located on the top of the phone, until the screen lights up.
Extend the Antenna: Pull out the antenna to its full length. This is important for getting a good satellite signal. Make sure you're in an open area with a clear view of the sky.
Wait for a Signal: The phone will take a moment to connect to the satellite network. You'll see a signal strength indicator on the screen when it's ready.
Switch to PTT Mode: Look for a button or menu option to switch the phone to Push-To-Talk mode. This mode is what allows for group communication, similar to a walkie-talkie.
Join a Talkgroup: In PTT mode, you might need to select a talkgroup. These are like channels on a walkie-talkie, and you'll use them to communicate with specific groups of people.
Start Talking: To talk, press and hold the PTT button, usually located on the side of the phone. Speak clearly into the microphone. Release the button when you're done speaking so others can reply.
Receiving Calls: When someone else talks, you'll hear them through the phone's speaker. Make sure the PTT button is released so you can listen.
Regular Calls: For regular one-on-one phone calls, switch back from PTT mode to normal mode and use it like a regular phone.
SOS Feature: For emergencies, the Iridium Extreme PTT has an SOS button. Press this in an emergency to send out an alert.
Turn Off the Phone: When you’re done, press and hold the red power button to turn off the phone. Retract the antenna to keep it safe.
Remember, the Iridium Extreme PTT is designed for both individual and group communication in remote areas, so its functionality is a bit different from a standard cell phone. The PTT feature is particularly useful for quick, back-and-forth communication with a group, especially in situations where regular cell service isn't available.
How To Setup The SOS Button
Setting up the SOS button on the Iridium Extreme PTT (Push-To-Talk) is an essential step to ensure you can quickly access help in emergencies. Here's a simple guide to setting it up:
Turn on Your Iridium Extreme PTT: Press and hold the power button until the device powers on.
Access the Menu: Navigate to the main menu of the device. This can typically be done by pressing the menu button.
Locate SOS Settings: Use the navigation keys to find the SOS or emergency options in the menu. Once found, select this option to enter the SOS settings.
Input Emergency Contact Information: In the SOS settings, you will need to input the contact details for your emergency response. This could be an individual, like a family member, or an organization responsible for emergency services.
Phone Number: Enter the phone number of your emergency contact. Be sure to include any necessary country codes and area codes.
Message: If the device allows, you can set up a predefined text message to be sent with your SOS signal. This message might include vital information about you and your situation.
Enable GPS: Make sure the GPS functionality on your phone is activated. This feature allows your device to send your exact location along with the SOS signal, which is crucial for effective emergency response.
Save Settings: After entering all the required information, save your settings.
Understand How to Activate and Deactivate the SOS: Familiarize yourself with the process of activating the SOS feature in an emergency (usually by pressing and holding the SOS button) and how to cancel it if it's activated accidentally.
Remember, the steps may vary slightly depending on the specific model and firmware version of your Iridium Extreme PTT. It's always a good idea to consult the user manual for the most accurate instructions. Setting up the SOS button is a critical part of preparing your satellite phone for use, particularly if you're going to be in remote or potentially hazardous environments.