The GPS signal is set to be received by the Antcom 1.9G15X-XXC-X-S GPS L1 Antenna in the L1 frequency band. Because it is lightweight, the enclosure is shipped without a radome, allowing you to customize it to your platform's needs. To enable pressure equalization in space applications, the antenna is vented. To reduce the size of the hole needed for installation mounting, the connector is located on the baseplate's bottom.
There are passive and active (amplified) variants of the product family available. Sharp band edges and linearity within the GNSS bands are provided by two-stage ceramic and surface acoustic wave (SAW) filtering in the active configurations. To assure operation in areas with high levels of ac ambient interference, the upper and lower frequency bands are independently boosted and filtered. The applications where the antenna is placed close to the GNSS receiver are best suited for the passive designs.
GPS L1 with M-Code support
Lightweight enclosure without radome
Vented for pressure equalization at low pressure and vacuum